Categories
High Force Actuators

Multi Power AIR CYLINDERS

  • Multi-Power Principle delivers tremendous thrust forces
  • Available in 10 bore sizes from 1 ⅛ to 12 inches
  • Composite rod bearing for longer life
  • Prelubed with Magnalube-G® Teflon grease
  • Chrome-plated stainless steel piston rods
  • Variants include Pancake®, Pancake II, LONGSTROKE™ and Square 1® versions plus air presses and boosters
Categories
High Force Actuators

Multi-Power® Air Presses overview

  • Multi-piston design to deliver tremendous forces
  • Cylinder bore sizes from 1 ⅛ to 12 inches and strokes to 12 inches
  • Precision framework with power factors from 19.6 to 93 times line pressure
  • Pre-lubed with Magnalube-G® Teflon™ grease
  • Chrome-plated stainless steel piston rods
  • Long-length composite bearing for long life
Categories
High Force Actuators

Multi-Power® Boosters overview

  • Outputs of 4.9 to 12.5 cubic inches per inch of stroke
  • Standard strokes: 1 inch increments through six inches
  • 1.9 through 4.8 power factors
  • Heavy-duty, corrosion-resistant construction
  • Two ports in boost chamber for inlet/outlet
  • Internally lubricated Buna-N seals
Categories
High Force Actuators

Hi Power Cylinders Tie Rod Cylinders

  • Available in 10 bore sizes from 1 ⅛ to 12 inches
  • Standard strokes to 12 inches
  • Composite rod bearing for longer life
  • Prelubed with Magnalube-G® grease
  • Chrome-plated stainless steel piston rods
  • Air service to 250 psi and hydraulic service to 500 psi
Categories
High Force Actuators

Series HHD Hydraulic Actuators overview

  • Pressure rated to 3,000 psi hydraulic service
  • Available in 16 bore sizes from 1 ½ to 24 inches
  • Extra-long rod, high strength cartridge provides maximum bearing support
  • Circular rod bushing retainer to remove the rod cartridge without disassembling the cylinder
  • Fine-grained cast iron piston
  • Over 20 NFPA standard mounting options
Categories
High Force Actuators

Air-Oil Tanks overview

  • Single- or double-tank units with choice of 1 ¼, 2 and 4 inch ID tanks
  • Double tank units save space in two-direction control systems
  • Translucent fiberglass tube for fluid visibility
  • May be used as storage tanks in booster systems
  • Can be combined with a Multi-Power® Booster
  • Operation to 150 psi
Categories
High Force Actuators

300 Series PNEUMATIC CRIMPING TOOLS

  • Fast, uniform connections with less operator fatigue
  • Bench mountable or portable units available
  • Pressure rated for 85 to 100 psi
  • Quick-change jaws for reduced setup time
  • Normally closed jaw design for safety